Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Screw Top, Solid, with White Silicone Rubber / Beige PTFE Liner, fitted in knurled polypropylene, White Caps. For use with 24-400mm threaded EPA Style vials. ND24 threads. 100/PK.
EPA quality liner is 45 Shore A, (Hardness), is 3.2mm thick and can be used for EPA testing or for long term storage with any 30, 40 or 60 EPA Style vial that has 40-400 threads. Solid top cap does not have an opening and is designed for storage or transportation.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Translucent Silicone Rubber / Natural PTFE, High Purity Septa, fitted in Bimetallic, Magnetic, Blue Caps with 8mm center holes. For use with 20mm Crimp Top Headspace vials. 100/PK.
Silicone Rubber / PTFE Septa with Durometer of 45 Shore A, (hardness) and 3.0mm thick with Ultra Clean PTFE and Ultra Low Bleed Rubber that is made by a proprietary process for ultra high purity, low extractables and temperature durability. This Septa is good for highly sensitive analyses. No color has been added to this Septa. The lower Durometer means that this is a softer Septa and therefore better for easier penetrations by autosampler needles. Wide temperature range from -60⁰ to 200⁰C. Bimetallic caps are still magnetic but easier to crimp compared to all steel crimp caps.
Microsolv Technology Corporation Caps, Snap Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This is one of the snap caps on the market and has been available for over 25 years. Pre-Slit septa are normally recommended for Waters Alliance instruments.
Microsolv Technology Corporation Caps, Crimp Top, with Red Rubber / PTFE Septa, fitted in aluminum, Green Caps. For use with 11mm Crimp or Snap Top, 12x32mm autosampler vials. 100/PK.
The Rubber is softer than Natural Red Rubber and provides better sealing after injection. Great for GC.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in "knurled", polypropylene, Black Caps. For use with 13-425mm thread, 15x45mm autosampler vials. 100/PK.
Economical Pre-Slit Cap for easy penetration by autosampler needles. Recommended for older Waters instruments. Use with 15x45mm, 4ml vials.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments. Natural Septa does not have any color pigment and will not introduce extractables.
Microsolv Technology Corporation Caps, Screw Top, with Red Butyl Rubber / Grey PTFE Septa, fitted in knurled polypropylene, White Caps. For use with 24-400mm threaded EPA Style vials. ND24 threads. 100/PK.
Septa is 55 Shore A, (Hardness), is 2.5mm thick and can be used as an autosampler vial cap or for long term storage with any 30, 40 or 60 EPA Style vial that has 40-400 threads. Cap has a 12.5mm top hole.
Microsolv Technology Corporation Caps, Snap Top, with Red Rubber / PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Red Rubber / PTFE is often the choice of labs that do not want to analyze with silicone rubber in the Septa and want a lower cost cap.
Gerstel REPL CAPS AND SEPTA MPS PK/10
Replacement caps and septa for MPS 10/100 mL wash station, Package of 10.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Translucent Silicone Rubber / Natural PTFE, High Purity Septa, fitted in Aluminum, Silver Pressure Relief Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
Silicone Rubber / PTFE Septa with Durometer of 45 Shore A, (hardness) and 3.0mm thick with Ultra Clean PTFE and Ultra Low Bleed Rubber that is made by a proprietary process for ultra high purity, low extractables and temperature durability. This Septa is good for highly sensitive analyses. No color has been added to this Septa. The lower Durometer means that this is a softer Septa and therefore better for easier penetrations by autosampler needles. Wide temperature range from -60⁰ to 200⁰C. Clear lacquered Caps have score lines that will break open at 3.0 +/ 0.5 Bar, for safety.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with White Silicone Rubber / White PTFE, High Purity Septa, fitted in Bimetallic, Magnetic, Blue Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
SIMILAR TO 95025-09-2SHigh Purity Silicone Rubber / PTFE Septa with Durometer of 45 Shore A, (hardness) and 3.0mm thick with Ultra Low Bleed Rubber that is made with a proprietary process for ultra durability, purity and low extractables. Excellent choice for highly sensitive analyses. The lower Durometer means that this is a softer Septa and therefore better for easier penetrations by autosampler needles. Wide temperature range from -60⁰ to 200⁰C. Bimetallic caps are still magnetic but easier to crimp compared to all steel crimp caps.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Natural PTFE is very pure and does not have dyes that could extract from it. Our most economical Silicone Rubber / PTFE Snap Cap.
Microsolv Technology Corporation Caps, Screw Top, Solid, with Natural Silicone Rubber / Natural PTFE Liner, fitted in knurled polypropylene, White Caps. For use with 24-414mm threaded EPA Style vials. ND24 threads. 100/PK.
Liner is 3.18mm (0.125") thick and can be used for long term storage with any 30, 40 or 60 EPA Style vial that has 40-414 threads. Solid top cap does not have an opening and is designed for storage or transportation.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit Septa, bonded in "knurled", polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
This is our Pre-Slit Screw Cap for autosampler vials. Pre-slit for easy penetration by autosampler needles. Recommended for Waters Alliance & Acquity instruments. Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS.